View C0603C0G1E0R2BTQ_7741176.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

i i s s u e d a t e : a p r i l 2 0 1 1 tdk mlcc us catalog version b11 c series high q capacitors t y p e : c 0 6 0 3 [ e i a c c 0 2 0 1 ]
r r e m i n d e r s please read before using this product s a f e t y r e m i n d e r s tdk mlcc us catalog ve rsion b11 page 148 r e m i n d e r s 1. if you intend to use a product listed in this catalog for a purpose that may cause loss of life or other damage, you must contact our company?s sales window. 2. we may modify products or discontinue production of a product listed in this catalog without prior notification. 3. we provide ?delivery specification? that explai n precautions for the specifications and safety of each product listed in this catalog. we strongly recommend that you exchange these delivery specifications with customers that use one of these products. 4. if you plan to export a product listed in this catalog, keep in mind that it may be a restricted item according to the ?foreign exchange and foreign trade control law?. in such cases, it is necessary to acquire export permission in harmony with this law. 5. any reproduction or transferring of the contents of this catalog is prohibited without prior permission from our company. 6. we are not responsible for problems that occur related to the intellectual property rights or other rights of our company or a third party when you use a product listed in this catalog. we do not grant license of these rights. 7. this catalog only applies to products purchased through our company or one of our company?s official agencies. this catalog does not apply to products that are purchased through other third parties.
tdk mlcc us catalog ve rsion b11 page 149 c series high q capacitors type: c0603 available through distribution only* higher q factor than standard capacitors high stability ith respect to ti e te perature fre uency and voltage cellent attenuation high self-resonant fre uency lo er po er dissipation less energy absorption capacitance range of 0.2pf to 15pf available in standard and tight tolerance please contact tdk for q values a a p p l i c a t i o n s high-fre uency applications pa modules cellular communication, bluetooth cable/satellite tv gps/satellite radio filter networks/matching networks rf amplifiers/low noise amplifiers vcos, tcxos, etc. dc blocking circuits f e a t u r e s s h a p e & d i m e n s i o n s dimensions in mm p a r t n u m b e r c o n s t r u c t i o n series name c 0603 c0g 1e 150 j t xxxx dimensions l x w (mm) temperature characteristic rated voltage (dc) nominal capacitance (pf) capacitance tolerance packaging style internal codes l body length w body width t body height b terminal width c a s e c o d e l e n g t h w i d t h c0603 0.60 0.03 0.30 0.03 temperature characteristics capacitance change temperature range c0g 030 ppm/oc -55 to +125oc v o l t a g e c o d e v o l t a g e ( d c ) 1e 25v the capacitance is expressed in three digit codes and in units of pico farads (pf). the first and second digits identify the first and second significant figures of the capacitance. the third digit identifies the multiplier. r designates a decimal point. c a p a c i t a n c e c o d e c a p a c i t a n c e 0r5 0.5pf 010 1pf 102 1,000pf (1nf) 105 1,000,000pf (1 f) t o l e r a n c e c o d e t o l e r a n c e w 0.05 pf b 0.10 pf c 0.25 pf d 0.50 pf e 0.20 pf g 2% j 5% p a c k a g i n g c o d e s t y l e t tape & reel * this series is available through the distribution channel only. please see www.tdk.com/distributor.php for a list of authorized distributors. l body length w body width t body height b terminal width
tdk mlcc us catalog ve rsion b11 page 150 * this series is available through the distribution channel only. please see www.tdk.com/distributor.php for a list of authorized distributors. c c a p a c i t a n c e r a n g e c h a r t c0603 [eia cc0201] capacitance range chart temperature characteristics: c0g (0 30ppm/oc) rated voltage: 25v(1e) 0.30 mm s t a n d a r d t h i c k n e s s c c a p a c i t a n c e ( ( p f ) c a p c o d e t e m p e r a t u r e c h a r a c t e r i s t i c s t o l e r a n c e w ( 0 . 0 5 ) b ( 0 . 1 0 p f ) c ( 0 . 2 5 p f ) d ( 0 . 5 0 p f ) e ( 0 . 2 0 p f ) g ( 2 % ) j ( 5 % ) 0.2 0r2 -55 to 125oc, 030 ppm/oc 0.3 0r3 0.4 0r4 0.5 0r5 0.6 0r6 0.7 0r7 0.8 0r8 0.9 0r9 1 010 1.1 1r1 1.2 1r2 1.3 1r3 1.5 1r5 1.6 1r6 1.8 1r8 2 020 2.2 2r2 2.4 2r4 2.7 2r7 3 030 3.3 3r3 3.6 3r6 3.9 3r9 4 040 4.3 4r3 4.7 4r7 5 050 5.1 5r1 5.6 5r6 6 060 6.2 6r2 6.8 6r8 7 070 7.5 7r5 8 080 8.2 8r2 9 090 9.1 9r1 10 100 11 110 12 120 13 130 15 150 16 160 18 180 20 200
tdk mlcc us catalog ve rsion b11 page 151 * this series is available through the distribution channel only. please see www.tdk.com/distributor.php for a list of authorized distributors. c c a p a c i t a n c e r a n g e t a b l e c0603 [eia cc0201] t d k p a r t n u m b e r ( ( o r d e r i n g c o d e ) t e m p e r a t u r e c h a r a c t e r i s t i c s r a t e d v o l t a g e c a p a c i t a n c e ( p f ) c a p a c i t a n c e t o l e r a n c e t h i c k n e s s ( m m ) c0603c0g1e0r2wtq c0g 25v 0.2 0.05pf 0.30 0.03 C0603C0G1E0R2BTQ c0g 25v 0.2 0.10pf 0.30 0.03 c0603c0g1e0r3wtq c0g 25v 0.3 0.05pf 0.30 0.03 c0603c0g1e0r3btq c0g 25v 0.3 0.10pf 0.30 0.03 c0603c0g1e0r4wtq c0g 25v 0.4 0.05pf 0.30 0.03 c0603c0g1e0r4btq c0g 25v 0.4 0.10pf 0.30 0.03 c0603c0g1e0r5wtq c0g 25v 0.5 0.05pf 0.30 0.03 c0603c0g1e0r5btq c0g 25v 0.5 0.10pf 0.30 0.03 c0603c0g1e0r6wtq c0g 25v 0.6 0.05pf 0.30 0.03 c0603c0g1e0r6btq c0g 25v 0.6 0.10pf 0.30 0.03 c0603c0g1e0r7wtq c0g 25v 0.7 0.05pf 0.30 0.03 c0603c0g1e0r8wtq c0g 25v 0.7 0.05pf 0.30 0.03 c0603c0g1e0r7btq c0g 25v 0.7 0.10pf 0.30 0.03 c0603c0g1e0r8btq c0g 25v 0.8 0.10pf 0.30 0.03 c0603c0g1e0r9wtq c0g 25v 0.9 0.05pf 0.30 0.03 c0603c0g1e0r9btq c0g 25v 0.9 0.10pf 0.30 0.03 c0603c0g1e010btq c0g 25v 1.0 0.10pf 0.30 0.03 c0603c0g1e010ctq c0g 25v 1.0 0.25pf 0.30 0.03 c0603c0g1e1r1btq c0g 25v 1.1 0.10pf 0.30 0.03 c0603c0g1e1r1ctq c0g 25v 1.1 0.25pf 0.30 0.03 c0603c0g1e1r2btq c0g 25v 1.2 0.10pf 0.30 0.03 c0603c0g1e1r2ctq c0g 25v 1.2 0.25pf 0.30 0.03 c0603c0g1e1r3btq c0g 25v 1.3 0.10pf 0.30 0.03 c0603c0g1e1r3ctq c0g 25v 1.3 0.25pf 0.30 0.03 c0603c0g1e1r5btq c0g 25v 1.5 0.10pf 0.30 0.03 c0603c0g1e1r5ctq c0g 25v 1.5 0.25pf 0.30 0.03 c0603c0g1e1r6btq c0g 25v 1.6 0.10pf 0.30 0.03 c0603c0g1e1r6ctq c0g 25v 1.6 0.25pf 0.30 0.03 c0603c0g1e1r8btq c0g 25v 1.8 0.10pf 0.30 0.03 c0603c0g1e1r8ctq c0g 25v 1.8 0.25pf 0.30 0.03 c0603c0g1e020btq c0g 25v 2.0 0.10pf 0.30 0.03 c0603c0g1e020ctq c0g 25v 2.0 0.25pf 0.30 0.03 c0603c0g1e2r2btx c0g 25v 2.2 0.10pf 0.30 0.03 c0603c0g1e2r2ctx c0g 25v 2.2 0.25pf 0.30 0.03 c0603c0g1e2r4btx c0g 25v 2.4 0.10pf 0.30 0.03 c0603c0g1e2r4ctx c0g 25v 2.4 0.25pf 0.30 0.03 c0603c0g1e2r7btx c0g 25v 2.7 0.10pf 0.30 0.03 c0603c0g1e2r7ctx c0g 25v 2.7 0.25pf 0.30 0.03 c0603c0g1e030btx c0g 25v 3.0 0.10pf 0.30 0.03 c0603c0g1e030ctx c0g 25v 3.0 0.25pf 0.30 0.03 c0603c0g1e3r3btx c0g 25v 3.3 0.10pf 0.30 0.03 c0603c0g1e3r3ctx c0g 25v 3.3 0.25pf 0.30 0.03 c0603c0g1e3r6btx c0g 25v 3.6 0.10pf 0.30 0.03 c0603c0g1e3r6ctx c0g 25v 3.6 0.25pf 0.30 0.03 c l a s s 1 ( t e m p e r a t u r e c o m p e n s a t i n g ) temperature characteristics: c0g (-55 to 125oc, 030 ppm/oc)
tdk mlcc us catalog ve rsion b11 page 152 * this series is available through the distribution channel only. please see www.tdk.com/distributor.php for a list of authorized distributors. c c a p a c i t a n c e r a n g e t a b l e c0603 [eia cc0201] t d k p a r t n u m b e r ( ( o r d e r i n g c o d e ) t e m p e r a t u r e c h a r a c t e r i s t i c s r a t e d v o l t a g e c a p a c i t a n c e ( p f ) c a p a c i t a n c e t o l e r a n c e t h i c k n e s s ( m m ) c0603c0g1e3r9btx c0g 25v 3.9 0.10pf 0.30 0.03 c0603c0g1e3r9ctx c0g 25v 3.9 0.25pf 0.30 0.03 c0603c0g1e040btx c0g 25v 4.0 0.10pf 0.30 0.03 c0603c0g1e040ctx c0g 25v 4.0 0.25pf 0.30 0.03 c0603c0g1e4r3btx c0g 25v 4.3 0.10pf 0.30 0.03 c0603c0g1e4r3ctx c0g 25v 4.3 0.25pf 0.30 0.03 c0603c0g1e4r7btx c0g 25v 4.7 0.10pf 0.30 0.03 c0603c0g1e4r7ctx c0g 25v 4.7 0.25pf 0.30 0.03 c0603c0g1e050btx c0g 25v 5.0 0.10pf 0.30 0.03 c0603c0g1e050ctx c0g 25v 5.0 0.25pf 0.30 0.03 c0603c0g1e5r1btx c0g 25v 5.1 0.10pf 0.30 0.03 c0603c0g1e5r1ctx c0g 25v 5.1 0.25pf 0.30 0.03 c0603c0g1e5r6btx c0g 25v 5.6 0.10pf 0.30 0.03 c0603c0g1e5r6ctx c0g 25v 5.6 0.25pf 0.30 0.03 c0603c0g1e060btx c0g 25v 6.0 0.10pf 0.30 0.03 c0603c0g1e060ctx c0g 25v 6.0 0.25pf 0.30 0.03 c0603c0g1e6r2btx c0g 25v 6.2 0.10pf 0.30 0.03 c0603c0g1e6r2ctx c0g 25v 6.2 0.25pf 0.30 0.03 c0603c0g1e6r8btx c0g 25v 6.8 0.10pf 0.30 0.03 c0603c0g1e6r8ctx c0g 25v 6.8 0.25pf 0.30 0.03 c0603c0g1e070btx c0g 25v 7.0 0.10pf 0.30 0.03 c0603c0g1e070ctx c0g 25v 7.0 0.25pf 0.30 0.03 c0603c0g1e7r5btx c0g 25v 7.5 0.10pf 0.30 0.03 c0603c0g1e7r5ctx c0g 25v 7.5 0.25pf 0.30 0.03 c0603c0g1e080btx c0g 25v 8.0 0.10pf 0.30 0.03 c0603c0g1e080ctx c0g 25v 8.0 0.25pf 0.30 0.03 c0603c0g1e8r2btx c0g 25v 8.2 0.10pf 0.30 0.03 c0603c0g1e8r2ctx c0g 25v 8.2 0.25pf 0.30 0.03 c0603c0g1e090btx c0g 25v 9.0 0.10pf 0.30 0.03 c0603c0g1e090ctx c0g 25v 9.0 0.25pf 0.30 0.03 c0603c0g1e9r1btx c0g 25v 9.1 0.10pf 0.30 0.03 c0603c0g1e9r1ctx c0g 25v 9.1 0.25pf 0.30 0.03 c0603c0g1e100etx c0g 25v 10 0.20pf 0.30 0.03 c0603c0g1e100dtx c0g 25v 10 0.50pf 0.30 0.03 c0603c0g1e110gtx c0g 25v 11 2% 0.30 0.03 c0603c0g1e110jtx c0g 25v 11 5% 0.30 0.03 c0603c0g1e120gtx c0g 25v 12 2% 0.30 0.03 c0603c0g1e120jtx c0g 25v 12 5% 0.30 0.03 c0603c0g1e130gtx c0g 25v 13 2% 0.30 0.03 c0603c0g1e130jtx c0g 25v 13 5% 0.30 0.03 c0603c0g1e150gtx c0g 25v 15 2% 0.30 0.03 c0603c0g1e150jtx c0g 25v 15 5% 0.30 0.03 c0603c0g1e160gtx c0g 25v 16 2% 0.30 0.03 c0603c0g1e160jtx c0g 25v 16 5% 0.30 0.03 c l a s s 1 ( t e m p e r a t u r e c o m p e n s a t i n g ) temperature characteristics: c0g (-55 to 125oc, 030 ppm/oc)
tdk mlcc us catalog ve rsion b11 page 153 * this series is available through the distribution channel only. please see www.tdk.com/distributor.php for a list of authorized distributors. c c a p a c i t a n c e r a n g e t a b l e c0603 [eia cc0201] t d k p a r t n u m b e r ( ( o r d e r i n g c o d e ) t e m p e r a t u r e c h a r a c t e r i s t i c s r a t e d v o l t a g e c a p a c i t a n c e ( p f ) c a p a c i t a n c e t o l e r a n c e t h i c k n e s s ( m m ) c0603c0g1e180gtx c0g 25v 18 2% 0.30 0.03 c0603c0g1e180jtx c0g 25v 18 5% 0.30 0.03 c0603c0g1e200gtx c0g 25v 20 2% 0.30 0.03 c0603c0g1e200jtx c0g 25v 20 5% 0.30 0.03 c l a s s 1 ( t e m p e r a t u r e c o m p e n s a t i n g ) temperature characteristics: c0g (-55 to 125oc, 030 ppm/oc)
tdk mlcc us catalog ve rsion b11 page 154 g g e n e r a l s p e c i f i c a t i o n s c0603 series ? high q capacitors no. item performance test or inspection method 1 external appearance no defects which may affect performance. inspect with magnifying glass (10 ? ). 2 insulation resistance 10,000m min. apply rated voltage for 60s. 3 voltage proof withstand test voltage without insulation breakdown or other damage. above dc voltage shall be applied for 1 to 5s. charge / discharge current shall not exceed 50ma. 4 capacitance within the specified tolerance. 5q (class 1) c : rated capacitance (pf) see no.4 in this table for measuring condition. 6 temperature characteristics of capacitance (class 1) capacitance drift within r 0.2% or r 0.05pf, whichever larger. temperature coefficient shall be calculated based on values at 25oc and 85oc temperature. measuring temperature below 20oc shall be -10oc and -25oc. 7 robustness of terminations no sign of termination coming off, breakage of ceramic, or other abnormal signs. reflow solder the capacitor on p.c. board (shown in appendix 1) and apply a pushing force of 2n for 10 r 1s. 8 bending no mechanical damage. reflow solder the capacitor on p.c. board (shown in appendix 2) and bend it for 1mm. class apply voltage class 1 3 ? rated voltage class measuring frequency measuring voltage class 1 1mhz 10% 0.5 - 5 v rms rated capacitance q c 30pf 1,000 min. c < 30pf 400 + 20 ? c min. t.c. temperature coefficient c0g 0 r 30 ppm/oc pushing force p.c. board capacitor 1 20 50 f r230 45 45 unit: mm * this series is available through the distribution channel only. please see www.tdk.com/distributor.php for a list of authorized distributors.
tdk mlcc us catalog ve rsion b11 page 155 g g e n e r a l s p e c i f i c a t i o n s c0603 series ? high q capacitors no. item performance test or inspection method 9 solderability new solder to cover over 75% of termination. 25% may have pinholes or rough spots but not concentrated in one spot. ceramic surface of a sections shall not be exposed due to melting or shifting of termination material. completely soak both terminations in solder at 235 r 5oc for 2 r 0.5s. solder: h63a (jis z 3282) flux: isopropyl alcohol (jis k 8839) rosin (jis k 5902) 25% solid solution. 10 resistance to solder heat completely soak both terminations in solder at 260 :? 5oc for 5 :? 1s. preheating condition temp.: 150 :? 10oc time : 1 to 2min. flux: isopropyl alcohol (jis k 8839) rosin (jis k 5902) 25% solid solution. solder: h63a (jis z 3282) leave the capacitor in ambient conditions for 6 to 24h before measurement. external appearance no cracks are allowed and terminations shall be covered at least 60% with new solder. capacitance q (class 1) c : rated capacitance (pf) insulation resistance meet the initial spec. voltage proof no insulation breakdown or other damage. 11 vibration reflow solder the capacitor on p.c. board (shown in appendix 1) before testing. vibrate the capacitor with amplitude of 1.5mm p-p sweeping the fre uencies from 10hz to 55hz and back to 10hz after 1min. repeat this for 2h each in 3 perpendicular directions. external appearance no mechanical damage. capacitance q (class 1) c : rated capacitance (pf) a section characteristics change from the value before test class 1 c0g capacitance drift within r 2.5% or r 0.25pf, whichever larger. rated capacitance q c 30pf 1,000 min. c < 30pf 400 + 20 ? c min. characteristics change from the value before test class 1 c0g capacitance drift within r 2.5% or r 0.25pf, whichever larger. rated capacitance q c 30pf 1,000 min. c < 30pf 400+20 ? c min. * this series is available through the distribution channel only. please see www.tdk.com/distributor.php for a list of authorized distributors.
tdk mlcc us catalog ve rsion b11 page 156 g g e n e r a l s p e c i f i c a t i o n s c0603 series ? high q capacitors no. item performance test or inspection method 12 temperature cycle reflow solder the capacitors on a p.c. board (shown in appendix 1) before testing. expose the capacitor in the conditions in step 1 through step 4, and repeat 5 times consecutively. leave the capacitor in ambient conditions for 6 to 24h before measurement. external appearance no mechanical damage. capacitance q (class 1) c : rated capacitance (pf) insulation resistance meet the initial spec. voltage proof no insulation breakdown or other damage. 13 moisture resistance (steady state) reflow solder the capacitor on p.c. board (shown in appendix 1) before testing. leave at temperature 40 :? 2oc, 90 to 95%rh for 500 +24,0h. leave the capacitor in ambient condition for 6 to 24h before measurement. external appearance no mechanical damage. capacitance q (class 1) c : rated capacitance (pf) insulation resistance 1,000m min. characteristics change from the value before test class 1 c0g capacitance drift within r 2.5% or r 0.25pf, whichever larger. rated capacitance q c 30pf 1,000 min. c < 30pf 400 + 20 ? c min. step temperature (oc) time (min.) 1 min. operating temp. r 3 30 3 2 reference temp. 2 ? 5 3 max. operating temp. r 2 30 2 4 reference temp. 2 - 5 characteristics change from the value before test class 1 c0g capacitance drift within r 5% or r 0.5pf, whichever larger. rated capacitance q c 30pf 350 min. 10pf c < 30pf 275 + 5/2 ? c min. c < 10pf 200 + 10 ? c min. * this series is available through the distribution channel only. please see www.tdk.com/distributor.php for a list of authorized distributors.
tdk mlcc us catalog ve rsion b11 page 157 g g e n e r a l s p e c i f i c a t i o n s c0603 series ? high q capacitors no. item performance test or inspection method 14 moisture resistance reflow solder the capacitors on p.c. board (shown in appendix 1) before testing. apply the rated voltage at temperature 40 r 2oc and 90 to 95%rh for 500 +24,0h. charge/discharge current shall not exceed 50ma. leave the capacitor in ambient conditions for 6 to 24h before measurement. use this measurement for initial value. external appearance no mechanical damage. capacitance q (class 1) c : rated capacitance (pf) insulation resistance 500m min. 15 life reflow solder the capacitor on p.c. board (shown in appendix 1) before testing. apply 2x rated voltage at 125 :? 2oc for 1,000 +48, 0h. charge/discharge current shall not exceed 50ma. leave the capacitors in ambient condition for 6 to 24h before measurement. use this measurement for initial value. external appearance no mechanical damage. capacitance q (class 1) c : rated capacitance (pf) insulation resistance 1,000m min. characteristics change from the value before test class 1 c0g capacitance drift within r 7.5% or r 0.75pf, whichever larger. rated capacitance q c 30pf 200 min. c < 30pf 100 + 10/3 ? c min. characteristics change from the value before test class 1 c0g capacitance drift within r 3% or r 0.3pf, whichever larger. rated capacitance q c 30pf 350 min. 10pf c < 30pf 275 + 5/2 ? c min. c < 10pf 200 + 10 ? c min. * this series is available through the distribution channel only. please see www.tdk.com/distributor.php for a list of authorized distributors.
tdk mlcc us catalog ve rsion b11 page 158 g g e n e r a l s p e c i f i c a t i o n s c0603 series ? high q capacitors appendix - 1a p.c. board for reliability test applied for c0603, c1005, c1608, c2012, c3216 appendix - 2a p.c. board for bending test applied for c0603, c1005 100 mm solder resist copper b a c 40 mm 1.0 mm c a b solder resist b 100 mm copper 40 mm material : glass epoxy ( as per jis c6484 ge4 ) p.c. board thickness : appendix - 2 0.8mm appendix - 1 1.6mm copper ( thickness 0.035mm ) solder resist case code dimensions (mm) jis eia a b c c0603 cc0201 0.3 0.8 0.3 * this series is available through the distribution channel only. please see www.tdk.com/distributor.php for a list of authorized distributors.
tdk mlcc us catalog ve rsion b11 page 159 s s o l d e r i n g i n f o r m a t i o n c0603 series ? high q capacitors reflow soldering unit: mm type symbol c0603 [cc0201] a 0.25 ~ 0.35 b0.2 ~ 0.3 c 0.25 ~ 0.35 ? r e c o m m e n d e d s o l d e r i n g l a n d p a t t e r n ? r e c o m m e n d e d s o l d e r i n g p r o f i l e a b c chip capacitor solder land solder resist excessive solder higher tensile force on the chip capacitor may cause cracking. ade uate solder insufficient solder small solder fillet may cause contact failure or failure to hold the chip capacitor to the p.c. board. ? r e c o m m e n d e d s o l d e r a m o u n t recommended soldering duration temp./ dura. solder reflow soldering peak temp ( c) duration (sec.) sn-pb solder 230 max. 20 max. lead-free solder 260 max. 10 max. recommended solder compositions sn-37pb (sn-pb solder) sn-3.0ag-0.5cu (lead free solder) preheating condition soldering temp. (oc) reflow soldering t 150 manual soldering t 150 maximum amount minimum amount r e f l o w s o l d e r i n g m a n u a l s o l d e r i n g ( s o l d e r i r o n ) t preheating 3sec. (as short as possible) 0 300 temp (oc) temp (oc) 0 t soldering natural cooling preheating peak temp over 60 sec. peak temp time * this series is available through the distribution channel only. please see www.tdk.com/distributor.php for a list of authorized distributors.
tdk mlcc us catalog ve rsion b11 page 160 p p a c k a g i n g i n f o r m a t i o n c0603 series ? high q capacitors ? c c a r r i e r t a p e c o n f i g u r a t i o n ? c c h i p q u a n t i t y p e r r e e l a n d s t r u c t u r e o f r e e l ? p p e e l b a c k f o r c e ( t o p t a p e ) carrier tape shall be flexible enough to be wound around a minimum radius of 30mm with components in tape. the missing of components shall be less than 0.1% components shall not stick to the cover tape. the cover tape shall not protrude beyond the edges of the carrier tape and shall not cover the sprocket holes. paper carrier tape pitch hole top cover tape bottom cover tape (bottom cover tape is not always applied) p a p e r c a r r i e r t a p e & r e e l case code chip thickness (mm) taping material chip quantity (pcs.) jis eia 3ppuhho c0603 cc0201 0.30 paper 15,000 carrier tape top cover tape direction & angle of pull 0.05 ? 0.7 n 0~15 q bottom cover tape (paper carrier tape) direction of pull force drawing direction leader 400mm min bulk 160mm min. chips bulk 160mm min * this series is available through the distribution channel only. please see www.tdk.com/distributor.php for a list of authorized distributors.
tdk mlcc us catalog ve rsion b11 page 161 a d d d i t i o n a l i n f o r m a t i o n c0603 series ? high q capacitors ? s s h a p e & d i m e n s i o n s tdk corporation established internal product environmental assurance standards that include the six hazardous substances banned by the eu rohs directive 1 enforced on july 1, 2006 along with additional substances independently banned by tdk and has successfully completed making general purpose electronic components conform to the rohs directive 2 . l b g b w t terminal electrode ceramic dielectric internal electrode 3 4 5 1 2 no. name material class 1 (1) ceramic dielectric cazro 3 (2) internal electrode nickel (ni) (3) termination copper (cu) (4) nickel (ni) (5) tin (sn) ? i i n s i d e s t r u c t u r e & m a t e r i a l s y s t e m case code dimensions (mm) jis eia l w t b g c0603 cc0201 0.60 0.30 0.30 0.15 0.20 min. ? e e n v i r o n m e n t a l i n f o r m a t i o n 1. abbreviation for restriction on hazardous substances, which refers to the regulation eu directive 2002/95/ec on hazardous substances by the european union (eu) effective from july 1, 2006. the directive bans the use of six specific hazardous substances in electric and electronic devices and products handled within the eu. the six substances are lead, mercury, cadmium, hexavalent chromium, pbb (polybromi nated biphenyls), and pbde (polybrominated diphenyl ethers). 2. this means that, in conformity with the eu directive 2002/95/ec, lead, cadmium, mercury, hexavalent chromium, and specific bromine-based flame retardants, pbb and pbde, have not been used, except for exempted applications. for reach (svhc : 15 substances according to echa / october 2008) : all tdk mlcc do not contain these 15 substances. for european directive 2000/53/ce and 2005/673/ce : cadmium, hexavalent chromium, mercury, lead are not contained in all tdk mlcc. for european directive 2003/11/ce : pentabromodiphenyl- ether, octabromodiphenyl-ether are not contained in all tdk mlcc. * this series is available through the distribution channel only. please see www.tdk.com/distributor.php for a list of authorized distributors.

▲Up To Search▲

Price & Availability of C0603C0G1E0R2BTQ

	To Download C0603C0G1E0R2BTQ Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .